Cold Rolled Steel Strips | Hardened and Tempered Steel Strips | Steel Wires
| Grades: | As per SAE Standards 1040/1045/1050/ 1055/1062/1075/1080/1095 As per DIN 17232 CK40/45/55/60/75/85/101/50CRV4 As per JIS G 3311 S45CM/S55CM/S60CM/S75CM/SK2M/SK4M As per IS 2507 C40/55/70/80/98/120Cr35 |
| Thickness: | 0.10 mm to 5.00 mm |
| Width: | 5.00 mm – 1300 mm |
| Finish: | Bright |
| Edges: | Slit Edges / Mill Edge |
| Hardness: | Can be supplied in different tempers as per the customer’s request. |
Applications:
Our Steel Strips are used in a variety of applications in many Industries.
Steel strips are widely used for making Circlips, Dowel pins, Clutch plates, Springs, Washers, Spacers, Clips, Pins, Measure Tapes, Seat Belts, Horn diaphragms, Cycle chain plates, Auto timing & Industrial chain plates, Typewriter parts, Hacksaw, bandsaw, Circular saw blades, Paper cutting knives, Rasps, Sprockets, Gaskets, Knitting needles, Umbrella ribs, Toe caps, Pen clips.
Hardened and Tempered Steel Strips
| Grades: | As per SAE Standards 1062/1075/1080/1095 As per DIN 17232 CK60/75/85/101/50CRV4 As per JIS G 3311 S60CM/S75CM/SK2M/SK4M As per IS 2507 C70/80/98/120Cr35 |
| Thickness: | 0.10 mm to 3.50 mm |
| Width: | 5.00 mm – 450 mm |
| Finish: | Bright/Blue/Bronze/Grey |
| Edges: | Slit Edges/Square Edges/ Rounded Edges |
| Hardness: | Can be supplied in different hardness ranges to suit the customer. |
Applications:
Our Steel Strips are used in a variety of applications in many Industries.
Steel strips are widely used for making Circlips, Dowel pins, Clutch plates, Springs, Washers, Spacers, Clips, Pins, Measure Tapes, Seat Belts, Horn diaphragms, Cycle chain plates, Auto timing & Industrial chain plates, Typewriter parts, Hacksaw, bandsaw, Circular saw blades, Paper cutting knives, Rasps, Sprockets, Gaskets, Knitting needles, Umbrella ribs, Toe caps, Pen clips.
Spring Steel Wires
| Grades: | As per DIN 17223 CLASS A, B, C, &D As per IS 4554 PART 1 of 1981Gr-1, Gr-2, Gr-3 and Gr-4 |
| Size Range: | Diameter 0.30 mm to 14.00 mm |
Flat Wires/ Special profile wires and sections
| Grades: | 15 CR3, 16Mn Cr5, SCM 420, EN353, SAE 8620, EN8, EN9, EN42, EN42B |
| Width: | 1.40mm – 20mm / Thickness – 0.30mm – 5.00mm |
| Edges: | Round, Rectangular and Square edges. |
| Profile: | Triangular, Half Round, Trapezoidal etc. |
Stainless Steel Wires – Spring Quality
| Grades: | AISI 302, 304, 316 etc. |
| Size Range: | Diameter 0.20 mm to 6.00 mm |
Galvanized Spring Wire
| Size Range: | Diameter 0.20 mm to 0.80 mm |
Rolling Shutter Wire
| Size Range: | Diameter 8.00mm - 4.88mm |
Applications:
Our Wires are used in a variety of applications in many Industries.
Steel wires are used for making different types of springs used in the Automotive, Electrical, & Cycle, Industry. Some wires are also used to make Rolling Shutter Springs. Our galvanized wires are used to make barbed wires for the fencing Industry.
Quality
| Enquiry
Cold Rolled Steel Strips
| Hardened
and Tempered Steel Strips | Steel
Wires
